background image

7

Officine Gullo

USER MANUAL

INSTRUCTIONS FOR USE

Attention! The appliance must only be used under surveillance.

LIGHTING AND REGULATING THE ELECTRIC OVEN

Before turning the oven on, make sure the oven racks are in the desired position.
Turn the control knob to the right and set the temperature wanted.
To turn the oven off, turn the knob to the left to position 0.

To turn the oven on, turn the selector knob (see figure) to the right or left into one of the 

following positions

Top + bottom heating element
Bottom heating element
Top heating element

Preheating the oven is essential for baking. It is recommended to pre-heat the oven
slightly warmer than the cooking set point fot at least 30 minutes. All cooking times are
based on a preheated oven unless otherwise stated in the recipe.

Caution:

 when the oven is on the door must be kept shut otherwise the knobs and 

protection sheet could get hot and be damaged.

CLEANING AND MAINTENANCE

Attention! During cleaning, do not wash the external parts of the appliance with direct sprays of water or with high 

pressure.

After every use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the perfect

functioning and long life of the appliance.

Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water

and neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a 

dry cloth. Do not use abrasive or corrosive detergents.

The enamelled parts should be washed with soapy water.

Oven: Cleaning the oven is made easier by removing the support grill.

Important: As well as ordinary cleaning and maintenance, it is advisable to have the installation checked by an

installer at least once a year.

It is therefore suggested to draw up an after-sales assistance contract.

Содержание FES10













Отзывы: