Officine Gullo ELG 90, Инструкция по установке и эксплуатации

Страница: 31 / 66

33
USER
Cooking time • end of cooking • clock • timer • manual function
Symbols indicating functions in progress:
Timer
Duration and manual function
Automatic program
Button for timer and buzzer
Automatic cooking duration
End of cooking time
Setting time and cooking time.
With the “+” button, the time increases, with the “-” button the time de-
creases at a speed directly proportional to the length of time the button
is pressed.
Select the desired function by pressing the corresponding button and set the time using
the +/- buttons.
At first control turning on, the display shows the flashing clock that increases by one unit
every minute. Follow the “Setting the clock” procedure in the next paragraph.
By pressing the and buttons simultaneously you enter the “Manual operation”. You
can set the temperature using the thermostat knob (T) and select the function using the
selector (S).
The clock function is activated by simultaneously pressing cooking duration and
end buttons. The time is then set by adjusting the +/- keys. Any previously set programs
are automatically deleted.
To set this function simultaneously press the cooking duration and end buttons.
The “A” symbol goes out and the pan symbol appears. The previously set programs
are deleted.
Functions
Display
Button legend
Setting a function
Appliance operation
Setting the clock
Manual operation
INSTRUCTIONS FOR USE
– MP models with 5 key programmer MP
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
34
Select the duration function (button ) and set the time with the +/- buttons. The “A”
symbol and the symbol appear. The oven switches on. When the hour of the day
coincides with the final time, viewable through the end of cooking button , the oven
will turn off and the pan symbol will disappear. The buzzer will sound.
The “A” symbol will flash.
Select the duration function (button ) and set the end time with the +/- buttons. The
“A” symbol and the pan symbol appear. The oven switches on. When the hour of the day
coincides with the final time the oven will turn off and the pan symbol will disappear. The
buzzer will sound. The “A” symbol will flash.
Select the duration function and set the end time with the +/- buttons. The “A” symbol
appears. The oven switches on and the pan symbol appears. Wait a few seconds un-
til the current time appears. Set the end time by pressing the end of cooking button. The
display shows an approximate end time. Use the +/- buttons to set the end time actually
required. The oven switches off and the pan symbol disappears. The pan symbol will
appear again when the time of day coincides with the end time less the cooking time. At
the end of the automatic program, the “A” symbol will flash. The buzzer will sound, the
oven and the pan symbol will turn off.
Select the timer function (button ) and set the desired time with the +/- buttons. The
bell symbol will stay on while the set time is counting down. When the time comes
to an end, the buzzer will sound.
The buzzer operates at the end of the cooking duration and timer function, and remains
active for 7 minutes. The buzzer can be stopped by pressing any button .
The intensity of the buzzer can be changed by pressing the “-” button without selecting
a function. You can choose from 3 different sound intensities and duration depends on
the time pressure is exerted on the button “-”.
The selected program starts after the time has been set. The time remaining can be
displayed at any time by selecting the corresponding function again.
There is a programming error if the time shown by the clock is between the cooking start
time and the cooking end time.
The error is signaled by the buzzer sounding and by the intermittent flashing of the
symbol “A”.
The cancellation of a program is done by selecting the manual mode. At the end of the
selected program, this will automatically cancel.
Semiautomatic opera-
tion with cooking dura-
tion
Semiautomatic opera-
tion with end of cooking
Automatic operation
with duration and end of
cooking
Timer
Buzzer
Starting a program and
control
Identifying a program-
ming error
Cancellation of a pro-
gram
INSTRUCTIONS FOR USE
– 5-button electronic programmer MP
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
A
[–]/[+]
29
Officine Gullo