Officine Gullo 20GG 304FU, Инструкция по установке

Страница: 8 / 48

EN
4
2 - Product Dimensions and Cutout Requirements
CUTOUT REQUIREMENTS
The surface of the entire back wall above the range and below the hood must be covered with a noncombustible material.
*Consult local code for exact location requirements.
OPENING WIDTH A & C B
Range 30”
30 1/16" (76.4) 6” (15.2)
Range 36”
36 1/16" (91.6) 7” (17.8)
Range 60”
60" (152.4) 2x6” (15.2)
Note: Clearances to non-combustible materials must
conform with local codes or, in the absence of local
codes, with the National Fuel Gas Code, ANSI
Z223.1/NFPA 54.
Minimum clearances:
Above cooking surface (above 36” [91.4 cm])
• Sides 3” (7.6 cm)
• Within 3” (7.6 cm) side clearance, wall cabinets no
deeper than 13” (33.0 cm) must be minimum 18” (45.7
cm) above cooking surface.
• Wall cabinets directly above product must be a minimum
of 30” (76.2 cm) above cooking surface.
• Rear - 0” with 3” (7.6 cm) backguard.
ADDITIONAL CLEARANCES:
For island installation, maintain 2-½ in. minimum from
cutout to back edge of countertop and 3 in. minimum from
cutout to side edges of countertop (see top view).
FLUSH ISLAND TRIM INSTALLATION
BACK
min 3” (7.6) min 3” (7.6)
min 2 1/2” (6.3)
ELECTRIC GAS
B B
*Suggested location
of utilities
2” (5.1) max. protusion from
wall for gas or electrical supply
3” (7.6)
4” 3/4 (12.3)
A
Min. 18” (45.7)
Min. 30” (76.2)
To bottom of
ventilation hood
Min. 18” (45.7)
Max. 13” (33)
Min. 6”
(15.2)
Min. 6”
(15.2)
C
(/(&75,& *$6
% %
6XJJHVWHGORFDWLRQ
RIXWLOLWLHV
´
´
(/(&75,& *$6
% %
´
$
0LQ ´
0LQ´
7RERWWRPRI
YHQWLODWLRQKRRG
0LQ ´
0D[ ´
0LQ´ 0LQ´
&
´
´PD[SURWXVLRQIURP
ZDOOIRUJDVRUHOHFWULFDOVXSSO\
30” 36” RANGE
60” RANGE