83220
VISITOR’S CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products May 2010
STEP 1
STEP 2
2
3
5
8
4
9
7
6
1
1
DETAIL A
PART
QTY
1. Base Frame . . . . . . . . . . . . . . . . . . 1
2. Caster . . . . . . . . . . . . . . . . . . . . . . 4
3. Seat Cushion . . . . . . . . . . . . . . . . . 1
4. Backrest . . . . . . . . . . . . . . . . . . . . . 1
5. Metal Bracket . . . . . . . . . . . . . . . . . 2
6. Plastic Bracket . . . . . . . . . . . . . . . . 4
7. Short Screws . . . . . . . . . . . . . . . . . 2
8. Allen Bolts . . . . . . . . . . . . . . . . . . . 4
9. Allen Wrench . . . . . . . . . . . . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Attach Plastic Brackets (6) to Base Frame (1) and secure Base Frame (1) to Seat Cushion (3) using two Metal Brackets (5) and four
Allen Bolts (8),
SEE DETAIL A.
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (9).
STEP 2
Slide Backrest (4) onto Base Frame (1) and secure using two Short Screws (7).
FULLY TIGHTEN ALL SHORT
SCREWS (7) USING PHILLIPS SCREWDRIVER (not provided).
Insert four Casters (2) into Base Frame (1), push hard until you
feel or hear the Caster (2) snap into place.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
Phillips Screwdriver also needed for assembly
(not provided)