MPPT PRO-X 10A | 20A | 30A | 40A
— 2 —
1.
Important Safety Instructions
Please keep this manual for future review.
This manual contains all safety, installation, and operation instructions for the PRO-X Series
Maximum Power Point Tracking (MPPT) controller ("controller" as referred to in this manual).
General Safety Information
Read all the instructions and warnings carefully in the manual before installation.
No user-serviceable components exist inside the controller. DO NOT disassemble or
attempt to repair the controller.
Mount the controller indoors. Avoid exposure to the components and do not allow water to
enter the controller.
Install the controller in a well-ventilated place. The controller’s heat sink may become very
hot during operation.
Suggest installing appropriate external fast-acting fuses/breakers.
Disconnect all PV array connections and the battery fast-acting fuse/breakers before
controller installation and adjustment.
Power connections must remain tight to avoid excessive heating from a loose connection.
WARNING
Do not install the controller in humid, salt spray, corrosion, greasy, flammable,
explosive, dust accumulative, or other severe environments.
Disclaimer:
Improper execution of the installation/configuration can lead to property damage and thus
endanger persons. The manufacturer can neither monitor the fulfillment of the conditions nor
the methods during installation, operation, use and maintenance of the system. Offgridtec
therefore accepts no responsibility or liability for any loss, damage or expense arising from or
in any way connected with improper installation/configuration, operation and use and
maintenance.
Similarly, we accept no responsibility for patent infringement or infringement of any other third-
party rights arising from the use of this manual.
