Important notes
Lumbar spine support stable
The Dynamics lumbar spine support
stable
relieves the lumbar spine and sa-
crum area due to its compression effect.
Incorporated reinforcement stays keep the
spine upright and help to improve body
posture.
←
Fitting instructions
The fitting instructions in pictures can be found
on the fold-over page at the beginning of the
brochure.
1
Open the Velcro fastener before putting on the sup-
port. The support comes with loops to make it easier
to put on. First lead your left hand through the inner
loop and place the support around your body.
2
Then lead your right hand through the outer loop and
close the Velcro fastener in front of your stomach.
Dear user,
We are pleased that you have chosen a
product from Ofa Bamberg and would like
to thank you for putting your trust in us.
Please take a moment to read through this
product information carefully to ensure
optimum effectiveness of your Dynamics
product.
Ofa Bamberg wishes you a speedy
recovery!
Please note
– The initial adjustment and strapping on of the
product must be carried out by qualified specialist
staff.
– Wear the product over a thin close-fitting shirt. If it
has to be worn in combination with other products,
then please discuss this in advance with your doctor.
– During long periods of rest (e. g. when sleeping) the
product should be removed.
– If you experience an unpleasant sensation, intense
pain or any other problem when wearing the
product, then remove it and contact your doctor or
specialist supplier.
– We use a comprehensive quality management sys-
tem to check our products. However, should there
still be reasons for complaint, please contact your
specialist supplier.
054_OT14_OFA_545105053_LWS_Bandage_stabil_innen.indd 8
03.12.2014 12:15:32
