WARNING
FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY DIRECTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB.
KEEP INSTRUCTIONS
IN POUCH PROVIDED WITH BASE FOR FUTURE USE.
- BEFORE EACH USAGE OR ASSEMBLY, INSPECT CRIB FOR DAMAGED
HARDWARE, LOOSE JOINTS, MISSING PARTS, OR SHARP EDGES. DO NOT USE
CRIB IF ANY PARTS ARE MISSING OR BROKEN. ASK YOUR DEALER OR WRITE
TO OEUF FOR REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE IF
NEEDED. DO NOT SUBSTITUTE PARTS.
- AFTER RAISING SIDE, MAKE SURE LATCHES ARE SECURED (FOR CRIBS WITH
DROP SIDES ONLY)
- WHEN A CHILD'S HEIGHT REACHES 35 IN (90 CM), THE CHILD SHOULD BE
PLACED IN A YOUTH OR REGULAR BED.
- DO NOT PLACE CRIB NEAR WINDOW WHERE CORDS FROM BLINDS OR
DRAPES MAY STRANGLE CHILD.
- DO NOT DRAG CRIB.
- IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S
PRODUCTS.
- DO NOT LEAVE CHILD IN CRIB WITH SIDE LOWERED. BE SURE SIDE IS IN
RAISED AND IN THE LOCKED POSITION WHENEVER CHILD IS IN CRIB. (FOR
CRIBS WITH DROP SIDES ONLY)
- WHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET MATTRESS TO
LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS, AND OTHER
OBJECTS THAT COULD SERVE AS STEPS FOR CLIMBING OUT.
- NEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC FILM AS
MATTRESS COVERS BECAUSE THEY CAN CAUSE SUFFOCATION.
- DO NOT USE A WATER MATTRESS WITH THIS CRIB.
- DO NOT PLACE ITEMS WITH A STRING AROUND CHILD’S NECK, SUCH AS
HOOD STRINGS OR PACIFIER CORDS.
- CAUTION: UPON COMPLETION OF ASSEMBLY, BE SURE ALL SCREWS AND
BOLTS HAVE BEEN TIGHTENED SECURELY. A PERIODIC CHECK SHOULD BE
MADE OF ALL SCREWS AND BOLTS AND RETIGHTEN IF NECESSARY.
CAUTION: ANY MATTRESS USED IN THIS CRIB
MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8
INCHES WITH A THICKNESS NOT EXCEEDING
6 INCHES.
(2)
