English 10 English
9
10
12
11
Figure 3
9. Spooled Wire (for GMAW / FCAW): Not supplied as
standard.
10. Wire Spool Holder: Maximum 15kg spools. Maximum
300mm diameter spools. Holder allows mounting
plastic, steel and fiber spools onto 51 mm spindle.
Note:
Plastic Brake Nut has a Left-hand thread.
11. Wire drive: 4-rolls wire drive.
12. Switch: Cold Inch / Gas Purge: This switch allows wire
feeding (wire test) and gas flow (gas test) without
switching on the output voltage.
User Interface
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Figure 4
13.
Thermal Overload Indicator: It indicates that the
machine is overloaded or that the cooling is not
sufficient. Displays show: “ALA ot” = Alarm Over
Temperature message.
14. Input Power Indicator: This LED lights up when the
welding machine is ON and is ready to work.
15. Left Display: Shows wire feed speed or welding
current. During welding shows the actual welding
current value.
16. Output Current LED Indicator: Informs that the Left
Display shows the output current in ampere.
17. Wire Feed Speed LED Indicator: Informs that the Left
Display shows the wire feed speed in m/min.
18. Right Display: Depending on the selected function and
the welding program shows the welding voltage in volts
or value of Arc Force. During welding shows the actual
output welding voltage.
19. Inductance Control: Adjusts the hardness of the arc. A
low value (1-4) makes the arc harder (more spatter),
while a high value (8-10) produces a softer arc (less
spatter). Adjustment range: 0 to +10.
