Waste Disposal
27
GA12119_00_A3 - 01/2012 - © Oerlikon Leybold Vacuum
7
Waste Disposal
Persons in possession of waste oil are responsible for disposal according to
the relevant standards and regulations.
As far as waste disposal is concerned, the relevant European, national and
local regulations are to be observed. We recommend that you entrust trans-
port and disposal of the waste to an authorized waste disposal company.
For decontamination according to the relevant standards, we recommend our
Oerlikon Leybold Vacuum Service.
The disposal of electrical and electronic components is subject to the
relevant national environmental and safety regulations. No old equipment is
withdrawn under the Waste Electrical and Electronic Equipment (WEEE)
Regulations. The responsibility for the disposal of old equipment rests with
the plant operator.
The cold head incorporates pressurized vessels. When disposing of
pressurized vessels, please observe the relevant national safety regulations.
The cold head may have been contaminated by the process or by
environmental influences. In this case the equipment must be decontami-
nated in accordance with the relevant regulations. Oerlikon Leybold Vacuum
offers this service at fixed prices. Further details are available on request.
Contaminated parts can be detrimental to health and environment. Before
beginning with any work, first find out whether any parts are con-
taminated. Adhere to the relevant regulations and take the necessary
precautions when handling contaminated parts.
Separate clean components according to their materials, and dispose of
these accordingly. Oerlikon Leybold Vacuum offers this service. Further
details are available on request.
When sending any equipment to Oerlikon Leybold Vacuum, observe the
regulations given in Section 5.1 ”Oerlikon Leybold Vacuum Service”.
Contamination
CAUTION
