2
Operating Instructions and Parts Manual
25982
MAGNETIC RECHARGEABLE
LED WORK LIGHT
5/19
2019 OEMTOOLS
™
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your work light. Read this manual carefully. Learn the
work light’s applications and limitations, as well as, potential
hazards specific to it.
2. Keep children away. All children should be kept away from
the work area. Never let a child handle a tool without strict
adult supervision.
3. Do not use the work light if the switch does not turn it on
and off. Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
4. Keep away from flammables. Do not attempt to operate this
work light near flammable materials or combustibles. Failure
to comply may cause serious injury or death.
5. Although eye damage from the OEMTOOLS
™
Work Light is
unlikely, never stare directly into the beam.
6. Do not attempt to recharge the battery by any other means
than USB, via the cable provided.
7. When servicing a tool, use only identical replacement parts.
Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of injury.
8. The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations
that may occur. The operator must understand that common
sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
DISPOSAL
At the end of the useful life of the Work Light, dispose of the
components according to all state, federal and local regulations.
BATTERY DISPOSAL
Exposure to high temperatures can cause the batteries to
explode; do not dispose of in a fire. Some countries have
regulations concerning battery disposal. Follow all applicable
regulations. Return used batteries to a collection location for
recycling. Call 800-822-8837 or visit www.call2recycle.org to
find a collection location.
CHARGING
Fully charge the battery before first use.
OPERATION
The OEMTOOLS
™
Rechargeable Work Light features a super
bright 3W COB for use as an inspection lamp and an ultra-bright
LED flashlight for use as a directional light. A push On/Off button
is located on the front of the light. A magnetic 180
º
adjustable
base and two super strong magnets on the back allow the user to
mount to any ferrous metal surface. Two 360
º
swivel hooks are
provided to hang the light from a hood or other object. The Li-Ion
long life battery is rechargeable via the included USB cord.
MAINTENANCE
1. Always store the OEMTOOLS
™
Work Light in a well-protected
area where it will not be exposed to inclement weather,
corrosive vapors, abrasive dust or any other harmful
elements.
2. Keep the Work Light clean by wiping with a
damp cloth.
3. Inspect cable periodically, and if damaged, replace.
4. Recharge periodically when not in use.
PRODUCT SPECIFICATIONS
Work Light :
400 Lumens
Top Light :
120 Lumens
Runtime:
3 Hrs. (work light), 9 Hrs.
(flashlight)
Charge Time:
4 Hrs.
Lightweight:
0.7 Lbs.
FEATURES:
• Two Powerful magnets on back
• On/Off button for work light and flashlight
• Indicator lights: green when fully charged and red when
charging
• High impact, rubberized ABS case for durability
• Two Nylon hooks swivel 360
º
• Magnetic 180
º
adjustable base
• Over charge and over discharge protection
• Ergonomic hand grip for comfort
