3
Operating Instructions and Parts Manual
25245
NO CONTACT INFRARED
THERMOMETER
10/18
2018 OEMTOOLS
™
21. Keep the handle dry, clean, and free from brake
fluid, oil, and grease.
22. Before use, read and understand all warnings,
safety precautions, and instructions as outlined
in the vehicle manufacturer’s service manual. It
is beyond the scope of this manual to properly
describe the correct procedure and test data for
each vehicle.
23. Always perform vehicle service in a properly
ventilated area. Never run an engine without
proper ventilation for its exhaust. Stop work and
take necessary steps to improve ventilation in the
work area if you develop momentary eye, nose,
or throat irritation as this indicates inadequate
ventilation.
24. Engine parts that are in motion and unexpected
movement of a vehicle can injure or kill. When
working near moving engine parts, wear snug fit
clothing and keep hands and fingers away from
moving parts. Keep hoses and tools clear of
moving parts. Always stay clear of moving engine
parts. Hoses and tools can be thrown through
the air if not kept clear of moving engine parts.
The unexpected movement of a vehicle can injure
or kill. When working on vehicles always set the
parking brake or block the wheels.
25. Avoid accidental fire and/or explosion. Do not
smoke near engine fuel and battery components.
26. The warnings, precautions, and instructions
discussed in this manual cannot cover all possible
conditions and situations that may occur. The
operator must understand that common sense and
caution are factors which cannot be built into this
product, but must be supplied by the operator.
27. For safety purposes and the prevention of damage
to expensive components it is advised that the
user have an understanding of basic automotive
repair and a working knowledge of automotive
systems.
28. We believe the information contained herein to be
reliable. However, general technical information
is given by us without charge and the user shall
employ such information at his own discretion and
risk. We assume no responsibility for results or
damages incurred from the use of such information
in whole or in part. Always refer to specific
instructions and technical information supplied by
vehicle manufacturer.
29. The manufacturer declines any and all
responsibility for damage to vehicles or
components if said damage is the result of
unskillful handling by the operator or of failure
to observe the basic safety rules set forth in the
instruction manual.
DISPOSAL
At the end of the useful life of the Infrared
Thermometer, dispose of the components according
to all state, federal, and local regulations.
PURPOSE
This Infrared Thermometer is used for measuring the
temperature of an object’s surface without contact.
Use for various hot, hazardous or hard-to-reach
objects.
This unit consists of optics, temperature sensor signal
amplifier, processing circuit and LCD display. The
optics collect the infrared energy emitted by the object
and focus onto the sensor. Then the sensor translates
the energy into an electricity signal. This signal will
show as a digital image on the LCD after the signal
amplifier and processing circuit.
