2
Operating Instructions and Parts Manual
24468
ALL-IN-ONE EMERGENCY TOOL - JUMP
STARTER / TIRE INFLATOR / 3 TON JACK
8/17
2017 OEMTOOLS
™
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your product. Read this manual carefully. Learn the
product’s applications and limitations, as well as potential
hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark work
areas invite accidents.
3. Keep children away. All children should be kept away from
the work area. Never let a child handle tools or equipment
without strict adult supervision.
4. DO NOT operate this product if under the influence of alcohol
or drugs. Read warning labels on prescriptions to determine
if your judgment or reflexes are impaired while taking drugs. If
there is any doubt, DO NOT attempt to operate.
5. Use safety equipment. Eye protection should be worn at all
times when operating this tool. Use ANSI approved safety
glasses. Everyday eyeglasses are NOT safety glasses. Dust
mask, non-skid safety shoes, hard hat or hearing protection
should be used in appropriate conditions.
6. Wear proper apparel. Loose clothing, gloves, neck-ties, rings,
bracelets or other jewelry may present a potential hazard when
operating this product. Keep all apparel clear of the product.
7. DO NOT overreach. Keep proper footing and balance at all
times when operating this product.
8. Check for damage. Check equipment regularly. If part of
the product is damaged, it should be carefully inspected
to make sure that it can perform its intended function
correctly. If in doubt, discontinue use of product.
9. Keep away from flammables. DO NOT attempt to operate
this product near flammable materials or combustibles.
Failure to comply may cause serious injury or death.
10. Store this product out of the reach of children and
untrained persons. This product may be dangerous in the
hands of untrained users.
11. Keep this product dry and clean.
12. Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one product may become hazardous when
used on another product.
13. Service must be performed only by qualified repair
personnel. Service or maintenance performed by
unqualified personnel could result in a risk of injury.
14. When servicing a product, use only identical replacement
parts. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of injury.
15. Maintain a safe working environment. Keep the work
area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions,
grease, oil, trash, and other debris. DO NOT use this
product in a damp or wet location.
16. Maintain labels and nameplates on this product. These
carry important information. If unreadable or missing,
contact OEMTOOLS
™
for a replacement.
17. Keep this product dry, clean, and free from brake fluid, oil,
and grease.
18. Avoid accidental fire and/or explosion. DO NOT smoke
near this product.
19. The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations
that may occur. The operator must understand that common
sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
20. We believe the information contained herein to be
reliable. However, general technical information is given
by us without charge and the user shall employ such
information at their own discretion and risk. We assume no
responsibility for results or damages incurred from the use
of such information in whole or in part.
21. The manufacturer declines any and all responsibility for
property damage or injury if said damage is the result of
unskillful handling by the operator or of failure to observe
the basic safety rules set forth in the instruction manual.
22. The procedures documented in this manual are to serve
as guidelines for the use of this equipment.
23. The use of this equipment is simple and straightforward
if you follow the instructions. When operating this
equipment, use common sense, and only use this
equipment for its intended purpose.
PRODUCT DESCRIPTION
The OEMTOOLS
™
All-In-One Emergency Tool functions as a jump
starter, tire inflator and automatic jack.
PRODUCT SPECIFICATIONS
Product Dimensions
15.32" (L) x 8.90" (W) x 6.06" (H)
Product Weight
12.35 Lbs.
Battery Capacity 12,000mAh
Output
12V 10A
Start Current
(Cold Cranking Amps) 200A
Peak Current 400A
Operating Temperature
-4°F (-20°C) to 140°F (60°C)
Charge Time
3 Hours
JACK SPECIFICATIONS
Max Current 13A
Output 150W
Max Capacity
3 Ton
Height Range
7.25" to 14.25"
INFLATOR SPECIFICATIONS
Max Current 10A
Max Pressure
150 PSI
Airflow
1.2 SCFM
Air Hose Length 2.5'
CONTENTS
All-In-One Emergency Jump Starter / Tire Inflator / 3 Ton
Jack, Charging Cable and Adapter, User manual
SPECIFIC SAFETY INSTRUCTIONS AND WARNINGS
WARNING
:
Thoroughly read and understand the provided
product manual before attempting to use this product.
WARNING
:
Jump starter for 12V batteries only. Never
attempt to jump start aircraft, boats, or vehicles with other
battery sizes.
WARNING
:
DO NOT connect the two jump starting
clamps together.
WARNING
:
DO NOT allow this product to come in
contact with water. DO NOT store in wet and damp spaces.
DO NOT submerge in any liquid.
WARNING
:
DO NOT attempt more than three (3)
successive jump starts. Allow 2 minutes between attempts,
and disconnect cables completely between attempts.
WARNING FIRE HAZARD
:
DO NOT operate in the
presence of flammable liquids, gasses, or dusts.
1. DO NOT attempt to use this unit if any cable clamp or
jump start cord is damaged.
2. DO NOT use as a vehicle battery charger.
3. DO NOT leave the product connected after the vehicle has
