4
Operating Instructions and Parts Manual
24383
VIDEO BORESCOPE
11/16
2016 OEMTOOLS
®
NOTE
Not all components of the Video Borescope are
replacement items, but are illustrated as a convenient
reference for location and position in the assembly
sequence.
(A)
9 mm
Imager
Head and
Cable
Figure
Description
Quantity
A
9 mm Imager Head and Cable
1
B
Magnet, Hook and Mirror
1
C
Video-Out Cable (TV-Out Cable)
1
D
Carrying Case (Not Shown)
1
E
Manual (Not Shown)
1
NOTE
Not all components of the Video Borescope are
replacement items, but are illustrated as a convenient
reference for location and position in the assembly
sequence.
(B)
Magnet, Hook
and Mirror
(C)
Video-Out Cable
(TV-Out Cable)
(1)
LCD Screen
(2)
Power Button
(3)
LEFT/
Dimming
Button
(4)
RIGHT/
Brightening
Button
(5)
Picture
Rotation
Figure
Description
Use
1
LCD Screen
2
Power Button
Use to turn on/off
the Video Borescope.
Press and hold 3
seconds to start
3
LEFT/
Dimming Button
Use to decrease
LED brightness
4
RIGHT/
Brightening Button
Use to increase
LED brightness
5
Picture Rotation
Use to rotate the
real-time image
WARNING
Always wear safety glasses and gloves.
OPERATING INSTRUCTIONS
1. Never insert probe into a space known or
suspected to contain live electric wiring.
2. The Video Borescope is intended for industrial
applications only. DO NOT use it for personal or
medical use in any way.
3. Never insert an attached probe into any flammable
gas or liquid including in any storage container or
fuel tank designed to store flammable gas or liquid.
4.
DO NOT disassemble the instrument. Doing so
creates a potentially fatal electrical hazard (and
voids the warranty as well).
5.
DO NOT expose the tool to rain or wet conditions.
Water entering the tool will increase the risk of
electric shock.
6. Keep cord away from heat, oil, sharp edges or
moving parts.
WARNING
SETUP AND CONNECTION
To use the Video Borescope, the imager head and
cable must be connected to the display unit. To
connect the cable of the display unit, align the key
and slot, slide them together, and finger-tighten the
knurled knob to hold the connection firmly in place.
