3
Operating Instructions and Parts Manual
24383
VIDEO BORESCOPE
11/16
2016 OEMTOOLS
®
25. Avoid accidental fire and/or explosion. Do not
smoke near engine fuel and battery components.
26. The warnings, precautions, and instructions
discussed in this manual cannot cover all
possible conditions and situations that may
occur. The operator must understand that
common sense and caution are factors which
cannot be built into this product, but must be
supplied by the operator.
27. For safety purposes and the prevention of
damage to expensive components it is advised
that the user have an understanding of basic
automotive repair and a working knowledge of
automotive systems.
28. We believe the information contained herein to be
reliable. However, general technical information
is given by us without charge and the user shall
employ such information at their own discretion
and risk. We assume no responsibility for results or
damages incurred from the use of such information
in whole or in part. Always refer to specific
instructions and technical information supplied by
vehicle manufacturer.
29. The manufacturer declines any and all responsibility for
damage to vehicles or components if said damage
is the result of unskillful handling by the operator
or of failure to observe the basic safety rules set
forth in the instruction manual.
30. This equipment is intended only for professional
use by personnel trained in performing the service
functions for which it is has been designed.
31. This equipment is designed for servicing a variety
of vehicles in a safe, convenient manner. However,
differences in vehicle makes and models may make
it impossible to use this equipment as it is intended.
Do not attempt to force the use of this equipment on
an application for which it is not designed to perform.
32. The procedures documented in this manual are to
serve as guidelines for the use of this equipment.
33. In addition to these guidelines, always follow the
manufacturer’s recommended procedures when
servicing each unique vehicle.
34. The use of this equipment is simple and
straightforward if you follow the instructions. When
operating this equipment, use common sense, and
always stop to think before using this tool.
DISPOSAL
At the end of the useful life of the Video Borescope,
dispose of the components according to all state,
federal and local regulations.
PURPOSE
The OEMTOOLS
®
Video Borescope is an ideal tool
for inspecting difficult-to-reach areas normally hidden
from sight. This ergonomic Video Borescope features
a 2.4" full color LCD screen, auto focus and viewing
capacity as close as 1" with crystal clear output.
The multipurpose Video Borescope is suitable for
internal inspection of cylinder bores and vehicle
compartments/components. Ideal for the inspection of
engines, machinery, buildings and infrastructure.
PRODUCT SPECIFICATIONS
Display:
2.4" TFT LCD
320 x 240 Pixels
Interface:
AV Out
Imager Head Diameter:
9 mm
Imager Head Cable Length: 1 Meter
Frame Rate:
-30 FPS
Field of View (FOV):
57 Degree
Depth of Field (DOF):
3 cm - 7 cm
Light Source:
4 Adjustable LED
Power Supply:
4 AA Battery
Image Sensor:
1/6” VGA Sensor
Resolution (Dynamic/Static): 640 (H) x 480 (V)
Waterproof Rating:
IP 67
TV Out:
NTSC and PAL
Useful Tools:
Magnet, Mirror and Hook
