CAUTION
Do not climb on the unit or try to
move it when
installed.
Keep out of the reach of children do not let us
playing
near the unit.
Never introduce a stick, your finger or others
in the
air inlet/outlet. The ventilator runs at high speed: that
would cause a very serious incident.
Important:
Well clean the plug
If dirtiness adheres to the plug or if it is badly inserted:
that can cause a fire or electric shocks.
If an abnormality (smell of burning
…
) occurs, stop the
unit, unplug or switch off the electricity.
Do not clean the appliance with water.
Water will go into the unit and will destroy the insulation.
Do not connect / unconnected the unit when
running ;
press before all the button OFF.
Do not draw on the power supply cable. Well
have in
hand the plug to disconnect it. Fire hazard could
occur due to the wrenching of the electric cable.
Do not touch the plug with wet hands. It will caused
an electric shock.
By stormy weather, cut off the pump to
avoid the
damaged caused by the lightning.
First off all the heat pump is stopped, put out leaves or
others little particles blocking the air inlet vanes.
Verify the compatibility of the network with the data written on the heat pump before beginning the installation.
The other disinfection systems such as electrolysis, chemical… are not recommended for a good running of the pump. The
pump must be ready before these systems.
For an optimal running of the heating pump, many rules must been respected:
A.
Use of free chlorine : max : 2.6mg/l
B.
Total bromine : max : 5.6mg/l
C.
pH : between 6.5 et 8.
5
Содержание KS25-C120
Страница 18: ...8 Gas Flow Diagram 18...
