FX
/RB
/RVE
Functioning
GB - 16
FIG. 1
2
2
3
3
4
1
1
5.1 - CONTROL BOARD AND SIGNALLING
LAMPS (Fig 1)
On the machine you can find following control elements:
1. Timer
The timer has three positions:
"
"
allows the machine manually to function, to start the
cycle press "
" or "
", depending on the
concerned model, to stop the cycle press "
".
"0"
the machine functioning is disabled.
"Minute counter (1a)"
It is possible to set the machine functioning minutes
(from 0 to 30 minutes) by turning the timer knob (1)
clockwise, then press "
" or "
", depending on
the concerned model, to start the cycle; the latter
ends when the timer knob (1) reaches “
0
”.
2. Green starting push-button "
" 1st speed.
enabled by turning the timer knob (1) on "
" or onto
the minute counter.
If you press it, the machine starts.
3. Red stop push-button "
"
If you press it, the machine stops.
4. Green starting push-button "
" 2. speed.
(If any)
Enabled by positioning the timer knob (1) on "
"or
on the minute counter.
If you press it, the machine starts.
Chapter 5
