background image

2

operating instructions and Parts manual 

24366

          Auto  CirCuit  tester         

introduCtion

This circut tester is used to test automotive electrical 
systems from 12 to 24 volts. In order to save hours of 
testing the automotive electrical system, it is designed 
to test the system without re-connection between the 
vehicles battery and the testing components. It con-
tains the following functions:
•  Determine the polarity and circuit condition (short/ 

open).

•  Activating the components with positive or negative 

current without a jumper wire

•  Testing the voltage and continuity of the circuit.
•  Backlit digital display.
•  Locate misfiring cylinders.
•  Measuring frequency of the high-tension ignition 

pulses can also be used to calculate the rotational 
speed of engine according to the measured frequency.

•  Peak detection.
•  Testing the voltage of a circuit and displaying the 

voltage reading on the LCD display within 1/10 of a 
volt.

For testing and safety purposes, this unit contains 
short-circuit protection, which can also check the 
ground connection voltage drop tests. The short-
circuit protection system contains the auto reset circuit 

breaker so that the technician will not waste fuses 
during the testing. The extension cable with this unit is 
long enough for a technician to test the whole system 
of the vehicle. The technician does not have to con-
tinually search for a good ground connection.

iLLuminAtion

For testing in poorly lit or dark areas, the unit provides 
illumination for your convenience. The illumination will 
automatically be turned on as the technician connects 
it to vehicle battery.

imPortAnt

Please read the complete manual before you start to 
use this instrument.

Warning: risK oF deAtH

When current is provided to the unit a spark may  
occur when the tip contacts the ground or certain circuits. 
Therefore please do not operate it around flammable 
fluids or gases. Please do not operate it with 110/220 volt 
house voltage as it is only for 12 – 24 DC volt systems.

Limited 90 dAy WArrAnty

If within 90 days from date of purchase, this product fails due 
to a defect in materials or workmanship, return the product with 
proof of purchase, prepaid, to OEM Warranty Dept., 3580 E. 
Raines Rd. #3, Memphis, TN 38118, for repair or replacement 
with an item of equal or greater value. This warranty excludes 
incidental/consequential damages and failures due to misuse, 
abuse or normal wear and tear. This warranty gives you specific 
legal rights, and you may also have other rights, which vary, 

from state to state. OEM will not be responsible for any conse-
quential or incidental damages arising from the breach of this 
or any other warranty, whether expressed, implied or statutory. 
Some states do not allow the exclusion or limitation of conse-
quential or incidental damages, so the above exclusion may not 
apply to you. This warranty gives you specific legal rights, and 
you may also have other rights which vary from state to state.

ALWAYS WEAR SAFETY GOGGLES.

Содержание 24366









Отзывы: