background image

The intellectual property of this product and manuals belobg to Odyssey Toys, without the 
expressed written consent or permission of Odyssey Marketing or Odyssey Toys, they 
may not be reproduced in any form, copy and distribute. 

If you are unable to resolve any problems encountered during installation, please 
contact Odyssey Toys immediately for assistance.
 

Be sure to check the following items one by one before each flight:

1. Before using this product, please be sure to have enough practice and experience to fly the 
Odyssey Toys Starfall X Racing Drone.
2. Be sure to check all parts are in good condition; if any part is worn or damaged, do not fly.
3. Always remove the propellers when setting up your radio or receivers to avoid serious injury! 
Check the receiver and cables after every flight. Damaged or wet electronic components, even if 
re-dried, should no longer be used.
4. Please check whether the propeller and motor are installed correctly and securely, and confirm 
positive spin and counter-spin propeller installement. Do not touch when the drone is powered to 
avoid serious injury.
5. Always perform a range  and function test on the ground . Repeat the test with the motor running 
and with short bursts of throttle to ensure proper  operation.
6. Keep the remote transmitter from any items that may cause radio interference; 
7. Make sure all components are accurately connected to their power supply.
8.Make sure all connections are secure. Do not pull on the cables when you unplug the connector.
9. Remember to turn on the remote control, and then start your flight. (After landing, the first step is 
to lock the aircraft, next take out the battery and then turn off the remote control.)
10. The propellers spin at a very high rate of speed. Keep the drone vehicle at least 3 meters distance 
away when the aircraft is in operation. Please keep away from obstacles, people, power lines. Keep 
a clear flight path.
11. All items and accessories should be kept away from children. If a child accidentally swallows any 
part, please seek immediate medical assistance.
13. Please use the original Odyssey motors and 6-inch propeller. Do not use aftermarket parts on the 
drone.
14. Protect the model and receiver from dust, dirt, and moisture . Do not expose the equipment  to 
vibrations and excessive heat or cold.
15. For safety and (CE) certification, unauthorized conversions and / or modifications of the Starfall 
X Racing Drone are not permitted or authorized by Odyssey Toys.
16. Before you fly, please check any relevant laws and regulations for your area and region. Always 

5

Intellectual Property

Caution & Notices for Product Use

Содержание STARFALL X ODY-2222

















Отзывы: