background image

Flight Test (continued)

Movement of 

throttle stick 

Transmitter Status

Position/Status of LED 

lights on aircraft

Aircraft status indicator lamp changes

from slow flashing of 0.8 seconds to 

rapid flashing of 0.5 seconds, it 

indicates that the aircraft is armed

successfully

Push the throttle 

stick to right bottom 

and pause for 3 

seconds, it will be 

powered on

Status of LED lights when the 

Drone is Powered On

Aircraft status indicator lamp from 

rapid flashing of 0.5 seconds to 

slow flashing of 0.8 seconds, it 

indicates that the aircraft is powered 

down successfully

Aircraft motors stop working

Push the throttle 

stick to left bottom 

and pause for 3 

seconds, it will be 

powered off

When battery voltage is lower than 

10.5 V, LED lights flash every 0.5 

seconds before and after aircraft’s 

flying

The drone can not work accurately

1

2

3

3. When the green LED light turns from slow flashing of 0.8 seconds to rapid flashing of 0.5 seconds, 

it indicates that the aircraft is powered on and initialized successfully and you can push the Throttle 

stick up. When the drone is going to take off, push the Throttle up quickly so it gains altitude (Take 

care to not push up to fast to avoid losing control of the drone).

4. Please pay close attention to the movement of the drone after taking off, and adjust the throttle 

as necessary.

3. After finishing the test flight, lock the aircraft first, next take out the battery and 

turn off the remote control,then the test is complete.

Pull the throttle stick upwards, aircraft 

motors start work and propellers 

begin rotating, aircraft can work

Flight Safety & Warnings

If the voltage of the battery gets too low while in-flight, the aircraft will begin to sound the low voltage 

alarm,The power of front and back indicator light will flash. Please land the drone quickly to avoid a 

serious crash and damage to the unit or injury to others.

•Please use Beginner Mode to take off the aircraft every time when you fly.

•After it lands, pull the throttle stick to the bottom left for 3 seconds to lock the aircraft, next take off 

the battery and then turn down the remote control.

 

Landing off: Please control the decent speed when the aircraft land off, it is better to slow down to 

avoid crash damage of the aircraft. After hearing the low voltage alarm of the remote control, please 

land off the aircraft quickly to avoid losing control of the aircraft or having it crash.

14

Содержание STARFALL X ODY-2222

















Отзывы: