7
Output of the generated analogue program audio signals (two mono or one stereo) is carried
out through
AUDIO OUT
sockets (8, fig. 1)
The Preview FullHD monitor connected through
HDMI OUT
socket (
10
, Fig.1) working in multiviewer
mode
for preview video sources, Program and Preset video signals, audio level monitoring,
service information - source markers, current mode, clock etc.
ETHERNET
socket (
11
, fig. 1) is used for connection with Ethernet network for loading and updating of
new firmware, loading of pictures (slides) and logos from external computer, systems
configuration, installations of not operative parametres, installations of system time, remote
control from external computer through the virtual keyboard and also in playout systems etc.
Through the
TALLY
socket (
12
, fig. 1) (8 keys) the alarm Tally bulbs are connected for displaying which active
videocamera on air .
Attention!
All connections should to make only at the switched off Power Supply of the
connected equipment!
2.Destination of control elements
2.1. Control panel
Figure 2.
2.2. Destination of control elements (Fig. 2)
1 PROGRAM BUS
buttons of program bus of mixing
2 PRESET BUS
buttons of preset (preparation) bus
3 BLACK
fade to black buttons
4
BARS
color BARS buttons
5
audio level control buttons
6
PC control
pass to PC control button
