Odys Slim X5, Руководство пользователя

Страница: 61 / 361

19
GB
2
Press the right button once or repeatedly to set one of three
flash modes. The flash mode changes from “Auto” to “Always
on” to “Off” each time you press the button. The corresponding
status symbol for the flash mode is shown in the upper left
corner of the LCD.
The flash is activated automatically when the light level is too low if
the flash is set to “Auto”. When “Always on” is set the flash is used
for every shot. When “Off” is selected, the flash is deactivated.
The flash only works in single shot mode and self-timer mode.
It does not work in burst and video mode.
Please note that using the flash increases battery consumption.
5.2 Using direct access buttons
Selecting photography mode directly
In photography mode, you can access the “Single” , “SelfTimer”
and “Sequence” modes by pressing the left button repeatedly.
The corresponding symbol is displayed at the top left of the LCD.
Selecting the resolution directly
In photography mode, the OK button can be used to select the
resolution progressively. The current resolution is displayed at the
top left of the LCD.
Accessing the flash mode directly
You can set the flash to “Auto” , “Always on” or “Off” by
pressing the right button in single shot and self-timer modes.
The corresponding symbol is displayed on the LCD.