ODYS MultiFlat MF 700 DVB-T
19
EN
7 Operation and System Setup
7.1 CLOCK Setting
1. Insure that the device is switched off.
2. Press the “TIME“ button on the device or on the remote control.
The display should start to blink.
3. Use the
,
buttons to set the hour.
4. Press the
or
to switch to the minute settings and continue as in step 3.
5. Press the “TIME” button again when finished.
The clock operates in 24 hour mode.
The settings will automatically end if no button is pressed within 10 seconds.
7.2 DVD disc Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the
played discs. If the codes don’t match, the disc cannot be played. This player’s default
code is region 2.
Preparation
1. After connecting the unit to the AC power, turn on the unit’s power by pressing the
POWER button on the front panel or the remote control.
2. Press the DVD button on the remote control or the SOURCE button on the front panel
to shift to DVD mode.
3. Press the EJECT button on the front panel or the remote control to open the disc
tray.
4. Load the disc with the labeled side facing up.
5. Press the EJECT button again to close the disc tray. The player will automatically
search for the disc and start playback.
Menu
Normally there is a selecting menu for DVD discs. You can press the MENU button on the
remote control to enter the root menu during DVD disc playback, and use the direction
buttons to highlight an item you would like to select. Press the OK button to select it.
Title & Chapter
Normally there are several titles in a DVD disc, and several chapters (sections) in a title.
You can select any title or chapter quickly by entering the relevant number.
Audio
DVD discs can contain up to 8 audio bit streams. For Example: German, English, French,
Spanish, etc. To select the audio bit stream you prefer press the AUDIO button on the
remote control during playback. The DVD player will play the next audio bit stream every
time you press the AUDIO button in succession.
