ODYS MultiFlat MF 700 DVB-T
16
EN
outdoor FM antenna
Earth
AM antenna
6.3 Connecting To Antenna
Connect the supplied AM/FM antennas to listen to the radio. In order to improve the signal,
move AM loop antenna away from system and other equipment. Extend FM antenna fully
and keep it as horizontal as possible after connection. When connecting the supplied AM
loop antenna, connect two black cords to AM and ground jacks as shown below.
If the FM reception is poor, use a 75
Ω
coaxial cable (not supplied) to connect system to an
outdoor FM antenna as above. If you connect the system with outdoor FM antenna, you
should earth the system in order to avoid lightning strike. Do not connect the earth wire to
gas pipe to prevent gas explosion.
6.4 Connecting To the Power Adapter
This unit is powered via the switching power adapter (supplied). Connect the AC adapter
to jack marked with “DC 12V IN” on the rear panel of the unit. Plug the two-prong end of
the power cord to the grounded electrical socket.
Note
When not using the unit, turn off the power of the unit first, and then unplug the power
supply to prevent malfunctions.
FM antenna