All dimensions in mm. All figures are illustrations of photos. Changes reserved
16
Crimp Instruction:
Correct crimp position will be attained by use of the appropriate Positioner. By rotating the
selector knob to selected number you will get the correct crimp connection.
The cimp tool has an internal ratchet which opens only after completing the crimp process.
Please consider the assembly instructions mentioned on page 8 and 9.
Coax-Cable
Crimp dies
RG 178, RG 196
082 000 039 101 000
RG 174, RG 188,
RG 316, RG 179,
RG187
082 000 039 102 000
RG 59
082 000 039 109 000
8 pt. Crimp Tool
Adjustable for cross section from 0.38 – 2.5 mm²
(AWG 22 – AWG 12).
Table for adjustment and Contact holder = positioner – see page 15
Part-No.: 080.000.038.000.000
Hexagonal Crimp Tool
for Coax contacts , with locking system
(ratchet).
Part-No.: 080.000.039.000.000
ODU MAC LC – Crimp Information
