All dimensions in mm. All figures are illustrations of photos. Changes reserved
15
Crimp Information
8
pt.
Crimp
tool
080.000.037.000.000
8 pt. Crimp tool
080.000.038.000.000
8 pt. Crimp tool
080.000.051.000.000
Position
no.
Contact holder
Position no.
Contact holder
Position no.
Gauge
∅
Termination
cross section
AWG mm²
Contact
∅
Strip-off
lenght
22/26
0,15 – 0,38
0,7
4
+0,5
4
081.701.002.748.037
9
> 0,65 < 0,7
18/20 0,5-1,0 1,3 4,5
+0,5
5
081.701.002.744.038
10
> 1,1 < 1,15
14/16
1,5-2,5
2,0
5
+0,5
7
081.701.001.702.038
11
> 1,6 < 1,65
Crimp Tools and Contact Preparation
Crimping creates an easy, reliable, corrosion-free and long-term connection between
conductor and contact. It requires little skill and can be performed by non-experts.
Crimping causes cold-flow of the conductor and contact material creating a gas-tight
connection between contact and conductor. A stiffening of the conductor at the connection,
as it is possible with soldering, can not occur.
Crimping can be performed on very small to very large conductor cross sections.
8 pt. Crimp Tool
Adjustable for cross section from 0.08 – 2.5 mm²
incl. Positioner for contacts
∅
0.7 - 2 mm –
with user-friendly digital display.
Part-No.: 080.000.051.000.000
8 pt. Crimp Tool
Adjustable for cross section from 0.08 – 0.5 mm²
(AWG 28 – AWG 20).
Part-No.: 080.000.037.000.000
ODU MAC LC – Crimp Information
