ENGLISH
OPERATING THE DECON SCRUBBER
3
POWER ON
The main power for the scrubber can be switched on by turning the MAIN POWER switch to the ON
position.
POWER OFF
The main power for the scrubber can be switched off by turning the MAIN POWER switch to the OFF
position.
FAN SPEED
The Decon Scrubber is equipped with an air mover fan, which runs between 750 and 1500 cubic feet
per minute.
In order for the fan to turn on, the MAIN POWER switch must be in the ON position. Once the MAIN
POWER switch is on, the fan speed can be controlled by rotating the FAN SPEED knob clockwise to
increase the speed, or counter clockwise to decrease the speed.
PROCESSOR SWITCH
The Decon Scrubber is equipped with three hydroxyl generating optics. In order for these optics to
turn on, the MAIN POWER switch must first be turned on.
With the PROCESSOR switch in the OFF position, all optics are off.
With the PROCESSOR switch in the LOW position, two optics are on. The green PROCESSOR
indicator will turn on in this position.
With the PROCESSOR switch in the HIGH position, all three optics are on. The green PROCESSOR
indicator will turn on in this position.