5
Do-Re-ME!™ Electronic Guitar
Sliding Bar: Slide the bar along the neck of the guitar for
different sound distortions.
Pitch Roller: Push up or down to adjust the pitch.
Sleep Mode: When the unit is inactive for approximately 5
minutes, it will go into sleep mode to save battery power.
Battery Installation:
• Make sure the Electronic Guitar is switched Off.
• Use a screwdriver to open the battery cover located at
the bottom of the speaker module.
• Install the required batteries according to the diagram
inside the battery compartment. Alkaline batteries
are recommended.
• Replace and secure the battery cover.
Battery Notice:
• The use of rechargeable batteries is not recommended.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon zinc) or
rechargeable batteries (if applicable).
• Batteries are to be inserted according to the correct
polarity (+ and -). Incorrect insertion can damage the unit,
cause fire or cause the batteries to explode.
• Batteries should be removed if the unit will not be used
for an extended period of time.
