Page 12
M-UM010-02 TTK 720 06/18
Once focused, the software will automatically center the fiber core onscreen. If a closer view of the
live image is desired, touch the “
+
Zoom” button in the bottom left corner of the screen. To go back
to the original zoom level, touch the “
-
Zoom” button. Zoom/Magnification has no effect on the final
analyzed image.
AC 089 One-Click Cleaner
“Dry Clean Method”
Insert fiber ferrule into one-click cleaner. Press
fiber and cleaner together until a
click
is heard.
There is no need to rotate the cleaner. Re-inspect
the fiber after one click to see if debris has been
cleared from the endface.
AC 092 Pad and Fiber Wash Pen
“Wet/Dry Clean Method”
Isolate a single wipe on the pad. Press liquid pen onto the wipe to soak the top 1/3. Press the fiber
ferrule at a 90
o
angle into the wet spot on the pad. Drag the fiber ferrule from the wet part of the wipe
to the dry part of the wipe. Re-inspect the fiber to see if debris has been cleared from the endface.
Low Magnification
High Magnification
3c - Clean the Endface if Necessary
When the fiber endface image is focused onscreen, it may be apparent that it needs to be
cleaned. Follow these instructions to clean the fiber endface.