Machine Introduction
Instructions
1.Machine assembly
❖
Negative clip installation
：
Connect the negative power line to the negative clip as the below
picture shows.
❖
Power line installation
：
Connect the power line to the power plug back in the machine as the
below picture shows.
2.
Boot
Connect the power line with machine then then press this button
in the machine,and when the
light is on press this button
to adjust the radio frequency energy range from 1-4 when the red
light means strength of the RF which we recommend 2 for the trail and adjust it up or down
accordingly to the reaction of the customers. Press this button
to adjust the vibration of the
handle raged from 1-4 and the lights mean the strength so 2 is recommended as well and can adjust
Connection
completed
