3. ENGINE
3-
67
1. Chain tensioner plug
2. O-ring
3. Spring
4. Chain tensioner plunger
4. Remove:
- Chain tensioner housing retaining screws
- Chain tensioner housing
- O-ring.
1. Screws
2. Chain tensioner housing
3. O-ring,
Timing Chain Tensioner Inspection
Check the chain tensioner housing and plug for
cracks or other damages. Replace if necessary.
Check chain tensioner plunger for free movement
and/or scoring.
Check if 0-rings are brittle, cracked or hard.
Replace if necessary.
Check spring condition. Replace if bent, broken or
worn.
Timing Chain Tensioner Installation
1. For installation, reverse the removal procedure.
However, pay attention to the following.
NOTE: Before installing the chain tensioner make
sure, that the camshaft timing gear can be moved
back and forth.
MOVE GEAR BACK AND FORTH
2. Apply engine oil on the plunger before
insta1lation.
3. Slightly turn the camshaft timing gear in order
to get the timing chain play on the tensioner side.
4. Slightly screw the plunger in until the timing
chain allows no more back and forth movement of
the camshaft timing gear.
5. Screw the plunger in an additional 1/8 turn to
reach the required specified torque.
TIMING CHAIN TENSIONER ADJUSTMENT
(TORQUE)
0.1 N·m(.9lbf·in)
NOTICE Improper adjustment of the timing chain
will lead to severe engine damage.
6. Fit the spring on one side into the slot of the
plug and on the other side into the plunger.
NOTE: Turn spring only clockwise in order to fit
the spring end into the notch of the plunger to
avoid loosening the plunger during spring
installation. Do not pre1oad the spring.
NOTE: Do not forget to place the 0-ring on chain
tensioner plug.
Содержание UTV Desertcross 1000cc-3
