MAINTENANCE
- 58 -
Constant Variable Transmission (CVT) System
! WARNING
Failure to comply with the instructions in this warning can result in severe
injury or death.
Do not modify any component of the CVT system. Doing so may reduce its
strength so that a failure may occur at a high speed. The CVT system has
been precision balanced. Any modification will cause the system to be out of
balance, creating vibration and additional loads on components.
The CVT system rotates at high speeds, creating large amounts of force on
clutch components. Extensive engineering and testing has been conducted
to ensure the safety of this product. However, as the owner, you have the
following responsibilities to make sure this system remains safe:
● Always follow all recommended maintenance procedures. See your dealer
as outlined in the owner's manual.
● This CVT system is intended for use on Yours products only. Do not install
in any other product.
● Always make sure the CVT housing is securely in place during operation.
CVT Drying
There may be some instances when water is accidently ingested into the
CVT system. Use the following instructions to dry it out before operating.
The drain plug is located on the bottom of the CVT cover.
1. Remove the drain plug. Allow the water to drain. Reinstall the drain plug.
2. Shift the transmission to neutral. Set the parking brake.
3. Start the engine. Apply varying throttle for l 0-15 seconds to expel the
moisture and air-dry the belt and clutches. Do not hold the throttle wide
open for more than 10 seconds.
4. Allow the engine RPM to settle to idle speed.
5. Test for belt slippage. If the belt slips, repeat the process.
6. Take the vehicle to your dealer for service as soon as possible.
NOTICE: Exposure to salt water will cause corrosion to metal components. If
your vehicle is operated in salt water areas, rinse it off frequently
with fresh water.