EMISSION CONTROL SYSTEMS
- 45 -
Noise Emission Control System
Do not modify the engine, intake or exhaust components, as doing
may affect compliance with U.S.A. EPA noise control requirement,
CFR 205) and local noise level requirements.
Operation on Public Lands in the U.S.A.
Your vehicle has a spark arrestor that was tested and qualified to be
in accordance with the USFS standard 5100-1c. Federal law requires that
this spark arrestor be installed and functional when the vehicle is operated
on
public lands.
Operation of off-road vehicles on public lands in the U.S.A. is regulated by 43
CFR 420. Violations are subject to monetary penalties.
Crankcase Emission Control System
This engine is equipped with a closed crankcase system. Blow-by gases
are forced back to the combustion chamber by the intake system. All exhaust
gases exit through the exhaust system.
Exhaust Emission Control System
The emissions from the exhaust of this vehicle are controlled by engine
design, including factory-set fuel delivery and ignition. The engine and
related components must be maintained at Yours specifications to achieve
optimal performance.
Engine idle speed is the only adjustment that you can perform. Any other
adjustments should be performed by an authorized by your dealer.
The emissions label is located on the frame behind the right front wheel.
Electromagnetic Interference
This spark ignition system complies with Canadian ICES-002.
This vehicle complies with the EMC requirements of European directives
97/24/EC and 2004/108/EC.
