Oden Control P220L, Руководство пользователя

Страница: 7 / 26

www.odencontrol.se 6
3.7. Cable with connector
The standard 10 m shielded cable has 9 active coloured wires and a cable connector. The cable is designed for
fixed installation and if placed in extreme outdoor environment, it should be covered with a protective hose.
3.8. Connection board A
Connection board A is used for analogue control and will fit to a standard DIN-rack
system. The board has 9 terminals marked with colour text corresponding to the colour
coded wires in the standard cable.
Grey Blue Violet Red Black White Brown Green Yellow
Com-
puter Com-
puter Com-
puter Power Power Control Control Position Position
TX (TD) RX (RD) GND 24 V DC 0 V DC IN + IN - OUT + OUT -
3.9. OVP (Oden Valve Program) and Computer cable
At delivery the actuator is programmed with default values of torque, speed, and working range etc. These settings
can be changed by using the OVP software (Oden Valve Program). The software can be installed from the CD
delivered with the actuator or it can be downloaded from our website.
A RS232 computer cable is needed to connect the computer to the analogue Connection board. The computer cable
is optional and not included in delivery, if not separately ordered. If the computer lacks a serial interface a standard
USB-Serial converter is needed.
For further information about OVP, go to section 7.