Pag. 6
9
BATTERY SETUP MENU
Display
Description
STDBY
Time in minute after that the display will be set in standby status ( If = 0 standby
not active )
STATO
If set to ON it means that the indicator is connected to battery so it is possible to
display the status of the battery charge.
During the standby status, the scale is not turned off; to return to normal weight indication,
press a key or move the plate of the scale.
In order to display the status of the battery charge, press the ESC key. The indication is a
value from 0 to 5; the maximum value of charge is 6,2 V corresponding to 5.
If the charge of the battery is lower than a safe value, the display will show the indication
“BATT” and after a time, it will automatically turned off.
10
HIGH PRECISION WEIGHT DISPLAY
The high precision corresponding value of the current weight will be indicated on the display.
Press ESC to exit.
11
EXTERNAL CONNECTIONS
J1 :
Load Cell Connection
J2 :
RS232 Serial Connection
1
Shield
2
Rx
2
+ Excitation
3
Tx
3
+ Signal
4
Gnd
4
– Signal
5
+ Reference
J3 :
Power supplying connection
6
– Reference
Internal
-
7
– Excitation
External
+ 7,5 V or + 12 Vdc
