ODB SKB700 Скачать руководство пользователя страница 10

Страница: 10 / 139

ODB COMPANY

800-446-9823

SKB700

SAFETY PRECAUTIONS

SYMBOL

MEANING

SAFETY ALERT SYMBOL:

Indicates danger, warning or caution. At-

tention is required in order to avoid serious personal injury. May be used in

conjuction with other symbols or pictographs.

Read and understand this entire manual before operating, maintain-

ing or repairing the leaf vacuum.

Disregarding this safety warning WILL result in serious equipment

damage, injury or possible death.

Disregarding this safety warning CAN result in serious equipment

damage, injury or possible death.

Disregarding this safety warning MAY result in minor or moderate

injury or property damage.

1.1 Safety Symbol Definitions

This manual provides the owners/operator with procedures for safe opera-

tion, maintenance and repair of your leaf collector. As with any machine,

there are hazards associated with their operation. For this reason safety is

emphasized throughout this manual. To highlight specific safety informa-

tion the following safety definitions are provided to assist the reader.

The purpose of safety symbols are to attract your attention to possible

dangers. The safety symbols, and their explanations, deserve your careful

attention and understanding. The safety warnings do not by themselves

eliminate any danger. The instructions or warnings they give are not sub-

stitutues for proper accident prevention measures.

Содержание SKB700












































































































































Результаты поиска

Содержание SKB700

Отзывы:

Похожие инструкции для SKB700

Бренды по названию

Популярные бренды

ODB SKB700, Руководство пользователя

Результаты поиска

Содержание SKB700

Отзывы:

Похожие инструкции для SKB700

Бренды по названию

Популярные бренды