ODB LCT60C, Руководство пользователя

Страница: 39 / 112

39
ODB COMPANY
800-446-9823
LCT60C
Maintenance Section
Lubrication Points, continued;
Trailer Wheel Bearings (figure 4.3b): Most of
ODB's units are equipped with "EZ-Lube" grease
fittings. This allows the operator to grease the
bearings without removing the hubs. The "EZ-
Lube" feature consists of axle spindles that have
been specially drilled and fitted with a grease zerk
in their ends (fig. 4.3c). When grease is pumped
into the zerk, it is channelled to the inner bearing
and then flows back to the outer bearing and even -
tually back out the grease cap hole. The trailer
wheel bearings should be checked and greased
after the first 30 days of service then at the begin -
ning of every season.
Grease specifications:
Thickener Point............................Lithium Complex
Dropping Point......................230 degr. C minimum
Consistency............................................NLGI No.2
Additives.........................EP,Corrosion & Oxidation
Inhibitors
Base Oil...................Solvent refined Petroleum Oil
Base Oil Viscosity............@40 deg. C 150cSt Min.
Viscosity Index.....................................80 Minimum
Pour Point...................................-10 deg. Minimum
Approved Sources:
Mobil Oil........................................Mobilgrease HP
Exxon/Standard......................................Ronex MP
Kendall Refining...............................Kendall L-427
Ashland Oil Co........Valvoline Val-plex EP Grease.
Penzoil.......Premium Wheel Bearing Grease 707L
For any questions concerning wheel lubrication
please consult the axle owner's manual supplied
with your leaf collector or contact ODB.
Figure 4.3b
1.
4.3 Lubrcation, continued;
Grease fitting is behind rubber plug
Figure 4.3c