www.odass.ca | [email protected]
- 3 -
5. Now use the shelf support clip to secure the shelf, as shown in
the picture.
VERY IMPORTANT: The shelves should not be forced.
They naturally find their position.
HOW TO OPERATE THE AIRER :
Ensure the Airer is folded out securely before loading it with laundry
and switching it on.
1. Make sure your electricity supply matches the voltage shown on
the ratings label then plug in the Airer.
2. Press On/Off button on the control panel. When it is on, the red
indicator light will turn on.
3. The Airer will heat up in 3 minutes.
4. Load evenly across the surface to avoid the Airer tipping over.
Clothes should be damp, not soaking wet. Wring out all
excess water first. Do not overload the Airer, the maximum
load of the Airer is 15kg.
5. When you have finished using your Airer switch off by pressing
the On/Off button again and unplug. Leave to cool down com-
pletely.
6. To fold closed. Start with the TOP shelf first, then the middle and
then the bottom. Now fold the supports together so the Airer is
folded flat.
HOW TO USE TIMER :
1. Press On/Off button on the control panel. When it is on, the red
indicator light will turn on.
2. Press timer button to set Airer to 2 hours and press the same
button again to change setting to 4 hours. When desired time
has been selected, the corresponding light will turn blue and the
red light will turn off.
3. The Airer will stop heating and switch off automatically after set
hours have ended.
WHEEL ASSEMBLY :
To attach the wheels you will need a 12mm spanner.
Begin by laying the folded Airier on a smooth, flat surface before
you start assembling.
1. There are 4 wheels (Fig. 1), one for each of the 4 main supports
(Fig. 2).
2. Screw each wheel into the holes at the base of each support
(Fig. 3) and tighten using a 12mm spanner (Fig. 4).
3. Lock and unlock the wheels using the brake on the wheels (Fig.
5)
HOW TO HANG LONG ITEMS :
1. Unfold the Airer and open out the
bottom shelf
2. Leave the top two shelves in an
upright position and hang your
clothes from the top rail.
3. The shelves should not be
forced. They naturally find their
position.
Red light = On
2 Hour Timer = Active
4 Hour Timer = Active
1
2
3
4
5
6
6
6
6
6