www.odass.ca | [email protected]
- 2 -
CAUTION : The plastic bubble bags used to wrap this appliance, or the packaging may be dangerous. To avoid risk of suffocation,
keep these bags out of reach of babies and children. These bags are not toys.
BEFORE FIRST TIME USE : Carefully unpack the Heated Tower Airer and remove any packaging, place the unit on a level, dry sur-
face ready for use.
NOTE : The appliance must be placed on a level, dry surface at least 1.5 meters away from any heat or water source
HOW TO SET UP THE AIRER:
1. Place the Airer on a dry level surface near a socket, with plenty
of space around it.
2. Open out the supports to a 90° angle
3. Slide all the shelf support clips (found on the two thinner sup-
ports), until they are facing straight out.
4. Stand at the side of the Airer that has the on/off switch and
open out the shelves, starting with the bottom shelf first, then
the middle and then the top.
TO OPEN
Shelves open in sequence - bottom shelf first, then middle,and
top shelf last.
TO CLOSE
Shelves close in sequence - top shelf first, then middle, and
bottom shelf last.
NOTE : There is a stopper on the top rail to ensure that the top
shelf cannot be over rotated.
IMPORTANT : If you force the shelf to rotate more than 90° (see
image below) you will break the shelf mechanism and invali-
date the warranty.
