OCZ Z-Drive R4, Инструкция по установке и быстрому запуску

Страница: 23 / 34

- 22 -
Removing the Linux Driver
1. Open a terminal with root privileges.
2. Remove the driver by typing “rmmod ocz10xx.ko” (See Figure 20).
Formatting Z-Drive R4 in Linux
3. The driver is removed when the cursor on the terminal returns.
4. If the driver module was not installed, a warning will pop up (See Figure 21).
Figure 20: Remove Driver in Linux with rmmod Command
Figure 21: Attempt to rmmod on Non-existing Driver Module
NOTE: These instructions will cover the most common and basic usage to format drives under
Linux environment. For the use of any other Linux tools, please consult the respective user
guides of the tools. The screenshots are taken on RHEL. Other distributions may look
different.
river is removed when the cursor on the terminal returns.
driver module was not installed, a warning will pop up (See Figure 21).
Figure 20: Remove Driver in Linux with rmmod Command