OCZ Z-Drive R4, Инструкция по установке и быстрому запуску

Страница: 14 / 34

- 13 -
Bootable Driver Installation Procedure:
1. Power off the PC. Insert the OCZ Z-Drive R4 PCI Express SSD into an available PCI Express x8 slot.
2. Power up the PC.
3. Insert the Windows Server 2003 CD into the CD/DVD-ROM drive.
4. When prompted, press the F6 key for third party SCSI or driver installation at the beginning of text
mode installation. Press the ‘S' key when setup asks if you want to specify an additional device.
5. Insert the OCZ Z-Drive R4 bootable driver floppy disk. Press 'Enter'. From the menu presented next,
select the OCZ Z-Drive R4 driver in the list and press the 'Enter' key.
6. Press 'Enter' key when prompted to continue on with text mode setup.
7. Follow the Windows 2003 setup instructions to partition and install the operating system.
8. Setup will copy files from the Windows Server 2003 CD to the OCZ Z-Drive R4 partition.
9. Restart the PC. After restarting, the setup process will resume to finish the Windows Server 2003
installation.
Setting the Z-Drive R4 as a Boot Device
1. To set the Z-Drive R4 as a boot device, the user must first change the boot order in the motherboard
BIOS.
2. Change the Z-Drive R4 to the primary boot device.
3. Save the settings and exit the BIOS.
4. The Z-Drive R4 should now be the boot device.
Usage 2: Installation as a Storage Drive
Installing the Windows Driver to Use the Z-Drive R4 as a Storage Drive
The Z-Drive R4 can become a storage drive in a computer with an existing Windows installation.
1. Follow the “Hardware Installation” section to install the card into the computer.
2. Turn on the computer and boot to Windows.
3. Insert the CD/USB key prepared in the “Download the Latest Driver” section into the computer CD
drive or USB slot.
NOTE: Please consult the system’s user manual for further detailed instructions on how to
access the BIOS and modify its settings.