7 Initial Operation
10 / 24
Instruction Manual SDI® 4 (G/54320/EN 0220 Rev01)
7
Initial Operation
Attention
Risk of incorrect use due to improper training
Before initial operation: Let OCULUS or an authorized dealer train you in the
operation of the SDI® 4.
7.1
Preliminary Steps
Remove the plastic carrying case from its packing and dispose of the packing
properly.
Make sure that the sterilisable rubber cap has been cleaned, disinfected and
sterilised before the first and every subsequent use.
Keep the plastic case and the transport lock for the star knob.
If you want to store the SDI® 4 for a longer period of time or if you want to
transport it, or if you have to return it for service or repair, this can only be
optimally done in the plastic case with special insert and with the transport lock
for the star knob.
Like the operation microscope, the SDI® 4 is part of an optical unit. Handle the
equipment with care. Do not expose the equipment to vibrations, knocks, soiling
and high temperatures (above 35°C).
Before assembling the unit, remove both protective dust covers and the
transporting lock for star knob. Keep the two dust covers for proper dust
protection later, in case you have to dismantle the SDI® 4 at some point.
7.2
Attach the SDI® 4 to an Operation Microscope
Always take care when mounting or removing the SDI® 4 that none of the optics
in the beam path become soiled.
1 Locking screw
Fig. 7–1: Before the installation of the SDI® 4
1
