OCULUS Go, Инструкция по безопасности и гарантии

Страница: 3 / 26

3
Requires 10W (5V 2A) AC adapter, not included, to charge the
device. For use only with IEC/EN 60950-1 Rated Input: 100-240
Vac/0.35 A, Output: 5 Vdc, 2 A max, double insulated, with LPS
output, or equivalent.
NOTE: Please visit www.oculus.com/setup for Set-Up Instructions.
Please visit https://support.oculus.com for Best Practices and
Troubleshooting.
Product Care and Maintenance
Please only use dry optical lens micro-fiber cloths for cleaning
of the headset lenses. Do not clean lenses with any liquid or
chemical cleansers. Do not clean the facial interface fabric with
alcohol or any other abrasive cleaning solution.
For cleaning of the straps, facial interface, and controller, only use
non-abrasive anti-bacterial wipes and wipe gently.
• Do not leave the headset in direct sunlight. Exposure to direct
sunlight can damage the optics and display.
• Do not shine a laser or external light source through the lenses
as it may damage the display.
• Ensure the battery tray cover is in good working condition and
locks in place.
• As with any electronic device, avoid exposure to water or fluids.
• Store components in their storage case when not in use to
minimize unintentional damage or environmental exposure.
• Operating Temperature: 0-40°C / 32-104°F, min. humidity 5%,
max humidity 95% RH (non-condensing).
• Non-Operating (Storage): -30-65°C / -22-149°F, 85%RH.