More functions/services
85
Step by Step
Using system functions from outside
DISA (direct inward system access)
If configured (contact your service personnel), you can use an exter-
nal phone like an internal station to set up an outgoing external con-
nection via the system. You can also activate or deactivate the follow-
ing system functions:
• Reset services and functions, code #0
Æ
page 83
• Call forwarding, code
*
1/#1
Æ
page 31
• Lock and unlock phone, code
*
66/#66
Æ
page 73
• Save your PIN, code
*
93
Æ
page 74
• Send a message, code
*
68/#68
Æ
page 77
• Leave an advisory message, code
*
69/#69
Æ
page 79
• Ringing group, code
*
81/#81
Æ
page 100
• Group call, code
*
85/#85
Æ
page 100
• Caller ID suppression, code
*
86/#86
Æ
page 71
• Camp-on tone, code
*
87/#87
Æ
page 50
• Open door, code
*
61
Æ
page 38
• Release door opener, code
*
89/#89
Æ
page 39
• Control relays, code
*
90/#90
Æ
page 89
• Do not disturb, code
*
97/#97
Æ
page 70
• Ringer cutoff, code
*
98/#98
Æ
page 70
• Dial using speed dial, code
*
7
Æ
page 45
• Associated service, code
*
83
Æ
page 84
Prerequisite: Your phone supports tone dialing (DTMF) or you can
switch your phone to tone dialing. The phone is not connected to the
system.
j
Establish a connection to the system. Enter the station number (con-
tact your service personnel).
j
Wait for the continuous tone (if necessary, switch phone to tone dial-
ing) and enter the internal number assigned to you and the corre-
sponding PIN.
(
Enter the code (only required if programmed in the system).
j
Wait for the dial tone and enter the code for example,
*
97 for Do not
disturb on. If necessary, make further entries; refer also to the user
guide for dial pulse/DTMF phones.
or
j
Dial the external number.