background image

OctoCam srl recalled that the product may constitute a mere aid in case of accidents for any assessment 
of their dynamics. The admission and assessment of their recording as evidence, however, shall be 

referred to the exclusive determination of the competent court.
OctoCam Srl, also, is not responsible for improper use of the product prohibited by current regulations, 
incorrect or otherwise does not comply with the instructions contained in the package.
To the extent permitted by applicable law, "OctoCam", Ltd. It assumes no liability for loss, damage or 

alteration of data or loss generally caused by using the product or its functionality.

NB: When taking and using images or video clips, obey all laws as well as privacy and rights of others.
The information contained herein may be changed without notice.
Pursuant to law OctoCam srl retains title of this document, which can not be copied, reproduced or 

communicated to others without permission.

For more information, visit:

 

www.octocam.it

Notice : 

The changes or modifications not expressly approved by the party responsible for compliance could 

void the user’s authority to operate the equipment.

IMPORTANT NOTE: 

To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device 

is permitted. Any change to the antenna or the device could result in the device exceeding the RF 

exposure requirements and void user’s authority to operate the device.

FCC INFORMATION

The Federal Communication Commission Radio Frequency Interference Statement includes the 

following paragraph:

The equipment has been tested and found to comply with the limits for a Class B Digital Device, 

pursuant to part 15 of the FCC Rules.  These limits are designed to provide reasonable protection 

against harmful interference in a residential installation.  This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the instruction, may 

cause harmful interference to radio communication.  However, there is no grantee that interference 

will not occur in a particular installation.  If this equipment dose cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on , the user is 

encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the 
  receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.
The user should not modify or change this equipment without written approval

form OCTOCAM S.R.LModification could void authority to use this equipment.

WiFi dongle FCC ID: 2AE36-ECOVEDR

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 

This device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

Содержание ECO VEDR




































Отзывы: