In order to get a tidy wiring, follow the following instructions: The power cable must be fixed by the
anchor position of
OCTOBOX 4V VEDR
to where it is available on the cigarette lighter of the car or in
the fuse box.
Ensuring a reasonable excess cable available in the connection to the system
OCTOBOX 4V VEDR
.
Place the power cable by choosing a path to the sides of the windscreen.
If possible, plug the cable into the space already available or obtainable by moving the pillar cover or
dashboard.
If the cover of the instrument panel can be removed easily lay the cable in a protected area.
If necessary, use the mounting materials supplied to realize anchor points auxiliaries.
The power cable must be laid in such a way as not to suffer mechanical stress that could compromise
their integrity.
Excess cord must be collected and anchored in such a way as not to constitute a hindrance in the
passenger compartment.
Ensuring a reasonable excess cable available in the connection area of the cigarette lighter or fuse
box
Then plug the power cord into the cigarette lighter of the vehicle or to a feed point (eg. Power
sub-key) in the fuse box.
We recommend installing a fuse 2A up cable.
It is also recommended not to ever connect to the CAN bus of the vehicle to gain power: always use a
light or fuse box.
4.3.1 Electric connection diagram
OCTOBOX 4V VEDR
is supplied with two poles power cables
The cable is composed of the following wires:
