Octek DRAGON EISA 486 Скачать руководство пользователя страница 23

Страница: 23 / 137

GENERAL FEATURES
__________________________________

require the full performance of the 16-bit standard, let
alone new 32-bit bus capabilities.

The introduction of this fully compatible 32-bit

processor architecture has facilitated the timely
development operating systems that take advantage of

the 386 capabilities. Windows/386, XENIX/386 and a
wide variety of 386-specific operating systems are

currently available and providing a platform for
application software development. A version of OS/2

(OS/2 2.0) that takes more complete advantage of the
386 architecture will probably be available by the time

DRAGON EISA board reach its customer.

The combination of the 386 and 486 architecture

and new operating system will drive 386 and 486-based

PC into new, more demanding user applications and will
increase the need to extend the ISA I/O bus to full 32-bit

capabilities. As 386 and 486-based machines has
already become the standard PC platform for business

applications, a full-function 32 bit I/O bus will be more
than necessary.

A number of industry leaders were working

together to come up an extension to the industry
standard architecture in 1989. The Extended Industry

Standard Architecture (EISA) is both fully compatible with
the vast installed base of ISA PCs and delivers the

capabilities required to meet market needs by delivering
high-performance 32-bit I/O capabilities. This bus

architecture has been developed by industry leaders to
assure its open availability to all interested parties,

without any financial or technical constraints. In this
way, the benefits of open industry standards will be

delivered to the market in a way that will be optimal to
customers.

Since its introduction, EISA was limited to be very

"high end" applications where cost is not an issue. The
main cause to limited application of EISA is the EISA

motherboard and add on card were very expensive

Содержание DRAGON EISA 486








































































































































Результаты поиска

Содержание DRAGON EISA 486

Отзывы:

Octek DRAGON EISA 486, Руководство пользователя, Страница: 23 / 137

Результаты поиска

Содержание DRAGON EISA 486

Отзывы: