Octek BISON II, Руководство пользователя

Страница: 18 / 57

CONFIGURING THE SYSTEM
_________________________________________________________________________
CONTROL OF SYSTEM SPEED
System speed can be controlled by keyboard
and turbo switch. To change the speed by
keyboard, use
`-'
and
`+'
of the numeric keypad.
Press
`Ctrl' `Alt'
and
`-'
for slow speed and press
`Ctrl' `Alt'
and
`+'
for fast speed.
RESET CMOS SETUP INFORMATION
Sometimes, the improper setting of system
setup may make the system malfunction. In this
case, turn off the power and set JP1 to 1-2 for a
while. The internal CMOS status register is reset.
Then set the jumper to 2-3 of JP1 and turn on the
power. The BIOS finds the CMOS status register is
reset and regards the setup information is invalid.
So it will prompt you to correct the information.