17
Replacing Virtuo Jukebox Touchscreen Glass
Replacing the Touchscreen Glass
30 Insert the ribbon into its connector and then flip the black tab down to secure the ribbon.
Insert ribbon
31 Using the tape that was set aside earlier, secure the ribbon to the monitor, being careful to leave a small
amount of slack at both ends to avoid putting stress on the ribbon.
32 Replace the monitor’s back cover and fasten it using the 4 screws you removed earlier. See figure
cover screws (300955-002 monitor model shown)
for the location of the screws.
33 Fasten the monitor to the touchscreen glass using the 4 screws you removed earlier. See figure
