15
Replacing Virtuo Jukebox Touchscreen Glass
Replacing the Touchscreen Glass
For the 300955-001 model, place the LCD panel on the touchscreen glass taking care not to damage the Flex
cable (ribbon). Then place the bracket on top of the panel. Fasten the screws on both sides.
Using a torque-
limiting screw driver, gradually torque all 4 screws to 6 Lbs-in.
300955-001 model bracket and LCD panel
27 For the monitor model 300955-001, reconnect the LVDS and backlight ctrl cables. For the backlight ctrl cable,
replace the aluminum tape that you set aside earlier. See figure
Monitor model 300955-001 cables to remove
for the cable connection locations.
IMPORTANT:
When performing the following steps, use the proper tool (torque-limiting screw
driver) and DO NOT OVERTIGHTEN the screws. Doing so may cause damage to the LCD
panel. TouchTunes is
NOT
responsible for equipment damage caused by improper installation.
