Octave TouchTunes Allegro, Руководство по установке

Страница: 20 / 84

OS2 Upgrade Kit Installation Guide
Install OS2 Upgrade Kit in MX-1
Removing JCB or JCB+ for JCB Computer
14
6. Disconnect all the cables that go into the computer.
Connections to remove from top of the JCB (MX-1 jukebox accessed from its rear service tray)
NOTE Prior to performing the next step, it is recommended to use cable flags (or just pieces of tape) to
tag each cable that connects to the jukebox computer, indicating which socket it goes into on the
computer. At a minimum, you should label all the Ethernet cables (network, Zones 1 to 3, MIC and
AUX IN, DMX) as these are very easy to mix up.